What to do if the card is inserted incorrectly?

During the initial installation of the electricity meter, many users may easily insert the wrong setting card into the meter due to insufficient attention to the card or too many setting cards of the same type. For example, if it is a three-phase direct meter with 10 (40) A and 20 (80) A, or if it is a three-phase mutual inductance meter with pulse constants of 600r/kw. h and 900r/kw. h, or if the same meter has different prices, different setting cards are required. If not careful, it is easy to confuse the setting cards.

If the setting card is inserted incorrectly, generally do not rush to insert the user card (it is best to set the setting card in the electrical workshop before installing the meter, and then insert the user card after installing the meter. This is to check whether the meter is working properly and to prevent the possibility of inserting the wrong setting card, otherwise it will be laborious and thankless to rework after installing the meter). If the wrong setting card is inserted for the same type of meter, you can immediately insert the correct setting card once to change it. If the setting card of different types of electricity meters is inserted incorrectly, the only solution is to reset the meter or replace the storage chip. In addition, if the wrong card is inserted and the user card is inserted into the electricity meter, in addition to resetting the meter or replacing the storage chip, the system data needs to be cleared and reissued or a "resend new user card" operation needs to be performed.